How can I hang my print on the wall?

Now that you have your print, the next step is figuring out how to display it to enjoy! To see a video with tips on how to hang your print, click on the video below:


1

Once you've opened your order's box, locate the small groove in the black support packaging. Using your finger, gently pry up the glass edge to release your glass print from the packaging.


Small groove:

Released from the packaging:


2

After removing the print from its packaging, turn it over and you will see the wall mount keyhole carved out of the foamcore backing. This will be where the head of the screw fits in.


For Large and Extra Large prints the keyhole will include a metal reinforcement:


3

All wall-mounted prints come complete with Wall-Dog™ screws. These screws are 1-1/4 inch long and can be used for concrete, masonry, and can be used directly into drywall without the need for an anchor. The best part is that they can be used for any size Fracture print!


4

Since these screws don't require an anchor, it’s super easy and quick to place into a wall. You'll just need a Phillips screwdriver. The best way to mount our prints to any wall is to ensure the mounting screw is almost completely flush to the wall when drilled in, before mounting the print.


5

Remember that little keyhole in the back? That will fit perfectly right over the screw. Once the print is seated flush against the wall, the weight of the print will settle the foamcore into place. (Be careful not to pull down on the print, as it can damage the foamcore backing!)

Our larger prints include a metal grommet to give a little extra reinforcement. 

Note: If the keyhole is too shallow, the foamcore may be gently removed with a fingernail or thin blade. Just be super careful to not scratch the back of the glass with the printed image.


6

And pat yourself on the back for a job well done!